EasyManuals Logo

VM Motori R754EU5 User Manual

Default Icon
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
R750EU5 - IE3 - TE4 - IE4 - ISE4
English 28 Ed.8 / 10-2012
GB
BATTERY: Disconnect the battery.
When it is fully charged, store it in a
safe place. Before doing this, protect
the terminals against corrosion by ap-
plying an anti-rust spray.
2) INTERNAL PROTECTION
COMBUSTION CHAMBER: Remove
the heating glowplugs from the head,
check the piston is in its lowest stroke
position (lower standstill point), then
spray with Petronas PROT 30 M pro-
tective oil. Repeat the operation for
the other cylinders, then reinstall the
glowplugs.
TURBOCHARGER: Remove the inlet
plug from the pipe that delivers oil to
the turbocharger, and ll with Petronas
PROT 30 M protective oil. Replace the
inlet plug, applying the correct tighten-
ing torque.
ELECTRIC COMPONENTS: Apply anti-
corrosion spray to the electric contacts
and connectors.
AIR SUCTION SYSTEM: check the air
lter is in good condition, and no for-
eign bodies/liquids are present:
If the air lter is damaged, replace
it
If there are any foreign bodies,
remove them
LUBRICATION SYSTEM: this procedure
must be carried out together with the
injection system protection procedure.
• Using the oil dipstick and check
whether there is engine oil in the
sump.
• Drain the oil from the sump.
• Fill the engine with Petronas PROT 30
M protective oil.
• Check the coolant level (for water-
cooled engines only). The coolant
mixture must be 50% demineralised
or distilled water and 50% Petronas
Parau Up (protective radiator uid
with monoethylene glycol and organic
inhibitor formulation complying with
ASTM D 3306 type 1 Standards).
• Start up the engine and run it until it
reaches the right temperature for wa-
ter-cooled engines (about 70°- 80°C);
for air-cooled engines, run the engine
for about 20 (twenty) minutes.
• With the engine up to temperature,
carry on for about 5 minutes so that
the system components are lubricated.
• Switch off the engine and wait for it to
cool down.
• Drain the oil from the sump.
• Drain off the coolant.
• Check for any uid leakage (and
make any necessary repairs).
• Disconnect the engine from all the
components used for the test.
Tech Library http://engine.od.ua

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the VM Motori R754EU5 and is the answer not in the manual?

VM Motori R754EU5 Specifications

General IconGeneral
BrandVM Motori
ModelR754EU5
CategoryEngine
LanguageEnglish

Related product manuals