Need help?Do you have a question about the VOKERA Mynute 16e and is the answer not in the manual?
General| Type | Combi |
|---|---|
| Mounting | Wall Mounted |
| Output | 16 kW |
| Fuel Type | Natural Gas |
| DHW Flow Rate | 6.8 l/min |
| Efficiency | 90.1% |
| Water Pressure | 1-3 bar |
| Warranty | 2 years |
| ERP Rating | A |
Welcomes the user and advises reading instructions carefully for reliable use.
Provides essential safety and operational guidelines for the boiler's use.
Emphasizes legal requirement for safe installation and maintenance by competent persons.
Details proper electrical connection, isolator use, and fuse size, stressing earthing.
Instructs users to fill out and post the guarantee card within 30 days.
Explains the importance of the Benchmark Log Book and installer verification.
Explains the boiler's function, control via programmer/thermostat, and electronic ignition.
Lists the physical dimensions of the boiler (Height, Width, Depth).
Specifies minimum clearance distances around the boiler for installation.
Guides users on familiarizing themselves with isolation, pressure checks, controls, and thermostats.
Describes the location and function of the mode switch, thermostat, and pressure gauge.
Details the procedure for turning on the boiler via the mode switch and programmer.
Provides step-by-step instructions for checking and refilling system pressure using the filling loop.
Explains the manual reset procedure using the mode switch and important fault indicators.
Advises on shutting down the system via programmer/clock and main water supply.
Recommends draining the system and turning off supplies for extended absences.
Guides on cleaning the casing using a damp cloth, avoiding abrasives.
Instructs to turn off gas supply and contact installer or gas supplier immediately.
Suggests contacting an installer to inspect the system for leaks if frequent topping-up is needed.
Explains the reset light indicates a fault and requires manual reset as per section 3.2.
Advises tenants to contact landlords and homeowners to call Vokera or a CORGI engineer.
Guides on contacting Vokera Customer Services with necessary details for fault diagnosis.
Explains how the mechanical clock automatically switches the boiler, including setting 'on'/'off' times and time of day.
Explains the three-position selector switch for manual override of timed settings.
Guides on setting the digital clock, preparing for programming, and entering 'on'/'off' commands.
Describes how to advance to next command or lock settings to continuous 'on' or 'off'.
Details the four options for CH & HW operation: OFF, TIMED, ONCE, and ON.
Guides on how to change programmed settings for heating and hot water.
Explains how to set a period where the system remains off before resuming programmed times.
Details the four options for CH & HW operation: OFF, TIMED, ONCE, and ON.
Guides on setting the actual day and time on the 24hr programmer.
Guides on how to change programmed CH and HW timings for the 24hr programmer.
To Next Page
