– Using wedge - T10039/1- , unclip trim panel -1- in
-direction of arrow- from catches.
Installing
– Fit trim panel in installation position, and press it on until catch‐
es can be heard to engage.
3.4.2 Removing and installing dash panel trim
panel, Multivan, left trim panel on driver
side
Special tools and workshop equipment required
♦ Release lever - T10039-
Removing
– Remove dash panel vent on driver side ⇒ page 213 .
– Using wedge - T10039/1- , unclip trim panel -1- in
-direction of arrow- from catches.
Installing
– Fit trim panel in installation position, and press it on until catch‐
es can be heard to engage.
3.4.3 Removing and installing dash panel trim
panel, Multivan, right trim panel on driv‐
er side
Special tools and workshop equipment required
Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
3. Dash panel 201