– Roll cover -1- upwards.
– Cut through upholstery clips -3-.
– Release cover -1- from padding -2-.
Installing
Install in reverse order of removal, observing the following:
– Attach cover to padding with new upholstery clips at the posi‐
tions indicated, using upholstery clip pliers - V.A.G 1634B- .
Note
The part numbers of the upholstery clips can be found in the ⇒ Electronic Parts Catalogue .
2.2.2 Separating cover and padding, Multi‐
van/Business, backrest cover, 2nd row
Special tools and workshop equipment required
Transporter 2016 ➤
General body repairs, interior - Edition 03.2020
2. Rear seat covers and padding 479