TECHNICAL PARAMETERS
BUZZER WORKING STATUS
serwis@voltpolska.pl pomoc@voltpolska.pl |
serwis@voltpolska.pl pomoc@voltpolska.pl |
Working status
źwhen city power abnormal swithover to battery mode - beeping one time
źbattery working low voltge or output overload - beeping every second
źprotection or outuput abnormal - beeping hurrily
Installation
źIf you find any damage upon package openning, please contact distribution
immediately.
źDon’t install the device up-side-down; not expose to direct sunlight or heat
source; away from children, away from water, moisture, oil or grease and any
flammable substance.
źFor better ventilation, fan outles and device ventilation should have at least 10cm
distance from the wall or other adjacent not heat producing equipment.
źMake sure the city power voltage and frequencey matches the device rated.
źThe device should be placed in the well grounded condititon to ensure the safety.
źBattery connection: connect the red cable to battery „+” pole and connect the
black cable to battery „-” pole, device cannot work under wrong connection.
500 W 800 W 1000 W 2000 W 2500 W 5000 W
500VA 800VA 1000VA 2000 VA 2500 VA 5000 VA
300W 500W 700W 1400W 1800W 3500W
voltage
frequency
voltage
frequency
distortions
48VDC
10A
312x310x167 540x330x130
4,2 4,7 6,8 9,5 12 22
overload, temperature, over and under voltage,battery discharge, short circuit,
overcharging
button battery mode/mains mode
230 VAC ± 1% in battery mode; 230 VAC ± 8% in mains mode with AVR
time of switching between battery
mode/mains mode
To Previous Page
Loading...
