Voltacon Conversol MAX 11KW - Page 22

20
Stay at latest screen
If selected, the display screen will
stay at latest screen user finally
switches.
20
Backlight control
Backlight on (default)
Backlight off
22
Beeps while primary source
is interrupted
Alarm on (default)
Alarm off
23
Overload bypass:
When enabled, the unit will
transfer to line mode if
overload occurs in battery
mode.
Bypass disable (default)
Bypass enable
25
Record Fault code
Record enable (default)
Record disable
26
Bulk charging voltage
(C.V voltage)
default: 56.4V
If self-defined is selected in
program 5, this program can be
set up. Setting range is from
48.0V to 61.0V. Increment of
each click is 0.1V.
27
Floating charging voltage
default: 54.0V
If self-defined is selected in
program 5, this program can be
set up. Setting range is from
48.0V to 61.0V. Increment of
each click is 0.1V.