OPERATING INSTRUCTIONS 16
-Hold the device firmly with both hands.
-The hand guard must be folded towards the back.
-Switching on: press safety lock and ON/OFF switch simultaneously.
-Switching off: release on/oFF switch.
Before use, sufficiently familiarize yourself with the sawing technique for this chainsaw. You will find information
about this in the trade literature. We recommend that you attend suitable training sessions. The notes here
serve only as a complement.
-Stand with both legs securely on the ground.
-Heed obstacles in the work area.
-While you are working, always hold the device firmly with both hands(with the left hand on the front handle
and the right hand on the rear handle balanced in a secure position).
-Search the work area and remove objects which could be in your way.
-When you begin your work, check the safety of the device(see Check Before Starting).
-Hold the device in both hands as instructed.
Switching On/off
Correct Posture
How to Saw Correctly
Note: The device will turn on only when both the safety lock and ON/OFF switch are both engaged.
After it is switched on, the safety lock can be released The ON/OFF switch needs to be held down for
the device to operate.
DANGER! Risk of injury! Never work on unstable surfaces. Never work above shoulder height. Never work
while standing on a ladder. Do not work while bent too far forward. Only use this device in favorable weather and
site conditions.
DANGER! Risk of injury! Always turn the motor off before you set this device down.
To Next Page
Loading...