CLEANING AND MAINTENANCE 21
-Remove the battery.
-Let the device cool down.
● Remove coarse dirt.
● Wipe down the device with a slightly damp cloth.
● Remove the guide bar.
● Clean dirt from the oil guide groove of the guide bar with a suitable tool.Use a plastic spatula,and do not use
any steel tools.
● Replace guide bar (see Assembling the Guide Bar and Saw Chain).
● Lift the tip of the guide bar slightly.
● Tighten the tensioning screw until the chain lies on the underside of the guide bar.
Special tools are required to sharpen the saw chain.This guarantees that the cutting of the chain occurs at the
correct angle and the correct depth. It is recommended that you have the saw chain sharpened by a
professional.
CLEANING AND MAINTENANCE
DANGERI Risk of injury! Before any maintenance or cleaning work:
Cleaning the Device
Cleaning the Oil Guide Groove of the Guide Bar
Re-tensioning the Saw Chain
Sharpeningthe Saw Chain
To Next Page
Loading...