To Next Page
C
Christopher RobertsonJul 29, 2025
What to do if my VOLTCRAFT 12 45 01 VC250 Multimeter shows no measured value change?
- Ggregory65Jul 29, 2025
If the VOLTCRAFT Multimeter shows no change in measured value, several factors could be at play: 1. **Incorrect Function**: Ensure the correct measurement function (AC/DC) is active. Check the display and switch the function if needed. 2. **Wrong Sockets**: Verify that you are using the correct measuring sockets by comparing your connection with the display. 3. **Fuse**: Examine the fuses to see if they are defective. 4. **Hold Function**: If you're using a VC290 model, check if the Hold function is activated (indicated by 'H' on the display). If so, press the “H” button to deactivate it.
General
