To Next PageTo Next PageWhat to do if no display appears when VOLTCRAFT Multimeter is turned on?
If the VOLTCRAFT Multimeter doesn't display anything when you turn it on, the battery might be flat. Try replacing the battery.
Why frequency measurement is not possible with VOLTCRAFT Multimeter?
If you cannot perform a frequency measurement with your VOLTCRAFT Multimeter, check if the measuring voltage (amplitude) is sufficiently high, meaning greater than 300mVeff or 600mVeff.
How to troubleshoot no measurement possible on VOLTCRAFT Multimeter?
If a measurement is not possible with the VOLTCRAFT Multimeter, ensure the measuring lines are correctly connected to the measuring sockets and that the fuses are working properly.
General| Type | Digital Multimeter |
|---|---|
| Max Voltage Measurement (DC) | 600 V |
| Max Current Measurement (DC/AC) | 10 A |
| Continuity Test | Yes |
| Diode Test | Yes |
| Frequency Measurement | Yes |
| Capacitance Measurement | Yes |
| Safety Category | CAT III 600 V |
| Display | LCD |
| DC Voltage Ranges | 200mV, 2V, 20V, 200V |
| DC Voltage Accuracy | ±(0.5% + 2 digits) |
| AC Voltage Range | 200 V / 600 V |
| AC Voltage Accuracy | 1.2 % |
| DC Current Ranges | 200 µA / 2 mA / 20 mA / 200 mA / 10 A |
| DC Current Accuracy | ±(1.0% + 2 digits) |
| AC Current Ranges | 200 µA / 2 mA / 20 mA / 200 mA / 10 A |
| Resistance Range | 200 Ω / 2 kΩ / 20 kΩ / 200 kΩ / 2 MΩ |
| Resistance Ranges | 200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ |
| Resistance Accuracy | ±(0.8% + 2 digits) |
| Temperature Measurement | Yes |
| Temperature Accuracy | 1.0 % |
| Frequency Accuracy | 0.1 % |
| Capacitance Ranges | 20 nF / 200 nF / 2 µF / 20 µF |
| Battery | 9 V |
Details the specific measurement capabilities and applications of the multimeter.
Outlines general warnings and liability for non-compliance with instructions.
Explains caution symbols, reading instructions, and overvoltage categories.
Provides specific guidance on current measurements, children, and handling voltages.
Provides step-by-step instructions for measuring DC and AC voltages.
Details the procedure for measuring resistance up to 40 MOhm.
Step-by-step guide for measuring AC/DC currents with different sockets.
Instructions for replacing internal fuses for different ranges.
Lists common faults and their possible causes for self-resolution.
Specifies maximum voltage and current input limits and overload protection.
Defines maximum input values for resistance, diode, and frequency measurements.
