To Next PageTo Next Page
Need help?Do you have a question about the VOLTCRAFT vc 820 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| DC Current Ranges | 400 µA, 4000 µA, 40 mA, 400 mA, 10 A |
| AC Current Ranges | 400 µA, 4000 µA, 40 mA, 400 mA, 10 A |
| Resistance Ranges | 400 Ω, 4 kΩ, 40 kΩ, 400 kΩ, 4 MΩ, 40 MΩ |
| Continuity Test | Yes |
| Diode Test | Yes |
| Frequency Measurement | 10 Hz to 10 MHz |
| Data Hold | Yes |
| Power Supply | 9 V Battery |
| Safety Category | CAT III 600 V |
| Display | LCD |
| DC Voltage Ranges | 400mV, 4V, 40V, 400V |
| AC Voltage Ranges | 4V, 40V, 400V, 600 V |
| Capacitance Measurement | 40nF, 400nF, 4µF, 40µF |
| Temperature Measurement | -20 °C to 1000 °C |
Provides crucial warnings for safe operation and hazard avoidance.
Lists the critical limits for voltage, current, and other inputs to prevent damage.
Helps identify and resolve common operational problems and faults.
Step-by-step guide for measuring DC and AC voltages.
Instructions for accurately measuring resistance values.
Procedures for testing diodes and checking electrical continuity.
Instructions for measuring DC and AC currents, including True Rms.
Essential safety guidelines for operating the multimeter.
Specifies maximum allowed input values to prevent damage.
Detailed procedures for performing voltage and resistance measurements.
How to measure both direct and alternating currents accurately.
Critical limits and warnings to prevent damage and ensure user safety.
Specifics on measuring DC and AC currents, including True Rms.
Critical safety warnings for operation and fuse replacement.
Key safety rules and maximum input value limits for safe operation.
Safety instructions presented in French, covering electrical hazards.
French list of maximum input values to prevent damage.
Step-by-step measurement procedures in French.
German safety rules and maximum input value limits.
