J
Jennifer DavisJul 26, 2025
Why is there no change of measured value on my VOLTCRAFT VC-20 Multimeter?
- Jjonathan57Jul 26, 2025
The measured value on your VOLTCRAFT Multimeter may not change if an incorrect measuring function (AC/DC) is active.
To Next PageTo Next PageWhy is there no change of measured value on my VOLTCRAFT VC-20 Multimeter?
The measured value on your VOLTCRAFT Multimeter may not change if an incorrect measuring function (AC/DC) is active.
General| Display | LCD |
|---|---|
| Resistance Measurement | Yes |
| Capacitance Measurement | Yes |
| Frequency Measurement | Yes |
| Measurement category | CAT III 600 V |
| Diode Test | Yes |
| Continuity Test | Yes |
| Type | Digital |
| Max Voltage | 600V |
| Max Current | 10A |
| Basic accuracy | 0.5 % |
| DC voltage reading range | 0.1mV to 600V |
| DC current reading range | 0.1 µA - 10 A |
| AC current reading range | 0.1 µA - 10 A |
| Resistance reading range | 0.1Ω to 20 MOhm |
| Power supply | Battery |
Instructions for setting measuring functions and switching off the device using the rotary switch.
Guide on attaching test prods to the rear holder for storage or one-handed operation.
Procedure for measuring DC and AC voltages, including range selection and polarity indication.
Process for measuring resistance, including continuity check and overflow conditions.
