S
Sara BeckJul 27, 2025
Why does my VOLTCRAFT VC-13 Multimeter display "OL"?
- NnparkerJul 27, 2025
The "OL" display indicates that the voltage measuring range has been exceeded. To resolve this, select a different measuring signal.
To Next PageTo Next PageWhy does my VOLTCRAFT VC-13 Multimeter display "OL"?
The "OL" display indicates that the voltage measuring range has been exceeded. To resolve this, select a different measuring signal.
What to do if my VOLTCRAFT Multimeter shows "- - - -" on the display?
The display showing "- - - -" indicates that the NCV function is active. Deactivate this function by pressing the "NCV" button.
Procedure for powering the multimeter on and off.
Step-by-step guide for taking measurements with the multimeter.
Instructions for using the non-contact voltage detection feature.
Step-by-step process for battery replacement.
General| Type | Digital Multimeter |
|---|---|
| Diode Test | Yes |
| Continuity Test | Yes |
| Measurement Category | CAT III 600 V |
| Power Supply | 9 V battery |
| Display | LCD, 3.5 digits |
| DC Voltage Range | 200 mV to 600 V |
| AC Voltage Range | 200 V to 600 V |
| DC Current Range | 200 µA to 10 A |
| Resistance Range | 200 Ohm - 2 MOhm |
