VOLTCRAFT VC-590OLED User Manual

Bedienungsanleitung
Digitales Zangen-Multimeter
VC-590OLED
Best.-Nr. 1181861 Seite 2 - 39
Operating Instructions
Digital Clamp Multimeter
VC-590OLED
Item No. 1181861 Page 40 - 77
Notice d’emploi
Multimètre à pince numérique
VC-590OLED
N° de commande 1181861 Page 78 - 115
Gebruiksaanwijzing
Digitale Multimeter/Stroomtang
VC-590OLED
Bestelnr. 1181861 Pagina 116 - 153

VOLTCRAFT VC-590OLED Specifications

General

Display Type	OLED
Measurement Categories	CAT III 600V, CAT IV 300V
Measuring type	True RMS
Diode Test	Yes
Continuity Test	Yes
Data Hold	Yes
Auto Power Off	Yes

Summary

Voltcraft Multimeter Intended Use and Limitations

Voltcraft Multimeter Operating Elements and Controls

Voltcraft Multimeter Safety Precautions

Voltcraft Multimeter Display Elements and Symbols

Voltcraft Multimeter Measurement Operation Guide

Turn on the multimeter

Current measurement “A”

Explains how to perform non-contact current measurements using the clamp meter, including AC and DC.

Voltage measurement “V”

Details the procedures for measuring alternating (AC) and direct (DC) voltages using the multimeter.

Temperature measurement

Describes how to connect and use the temperature sensor for measuring temperatures in Celsius or Fahrenheit.

Resistance measurement

Outlines the steps for measuring resistance, including checks for continuity and handling low-resistance values.

Continuity test

Explains how to perform a continuity test, including the audible beep indication for low resistance.

Diode test

Capacitance measurement

Non-contact voltage detection “NCV”

Explains the NCV function for detecting AC voltage presence without direct contact, including signal strength indication.

Voltcraft Multimeter Additional Functions

Voltcraft Multimeter Cleaning and Maintenance

Battery Replacement Guide

Voltcraft Multimeter Troubleshooting Guide