EasyManua.ls Logo

VOLTCRAFT VC 260 - User Manual

VOLTCRAFT VC 260
93 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Version 12/04
BEDIENUNGSANLEITUNG
Digital Multimeter
VC 260 Seite 4 - 25
Digital Multimeter
VC 260 Page 26 - 47
Digital Multimeter
VC 260 Page 48- 69
Digitale multimeter
VC 260 Page 70 - 91
Best.-Nr. / Item-No. / N
o
de commande:
12 14 16

Questions and Answers

  • M
    Mark SchneiderAug 1, 2025
    What to do if my VOLTCRAFT VC 260 Multimeter has no display when turned on?
    • E
      Edward SandersAug 2, 2025
      If your VOLTCRAFT Multimeter doesn't display anything when turned on, consider these points: * Check if the capacitor is discharged. * Consider when the installed capacitor was last charged. * Note that the multimeter might have automatically turned off due to being idle for 30 minutes.
  • L
    Lisa OwensAug 15, 2025
    Why is measurement of current not possible with my VOLTCRAFT VC 260?
    • D
      Darren KingAug 15, 2025
      If you cannot measure current with your VOLTCRAFT Multimeter, verify the following: * Check if the fuses for the current ranges are OK. * Ensure the measuring lines are correctly connected to the measuring sockets. * Confirm the measuring cables are connected to the A or µA/mA-socket and COM.

Summary

Introduction

Intended Use of the Measuring Instrument VC 260

Details the specific applications and purposes of the VC 260.

Operating Elements

Describes the various controls and indicators on the multimeter.

Safety Instructions

General Safety Warnings

Crucial safety information and warnings for operating the device.

Handling and Startup

Charging the Instrument

Instructions on how to charge the multimeter's internal capacitor.

Carrying out Measurements

Voltage and Current Measurements

Procedures for measuring AC/DC voltage and current.

Resistance, Diode, Continuity, and Capacity Tests

How to perform resistance, diode, continuity, and capacity measurements.

Frequency Measurement

Guide for measuring frequency using the multimeter.

Disposal and Troubleshooting

Disposal Procedures

Instructions on how to safely dispose of the multimeter.

Troubleshooting Common Issues

Solutions for common faults and problems.

Maintenance and Calibration

Instrument Maintenance and Cleaning

Guidelines for cleaning and maintaining the multimeter.

Replacing the Fuse

Step-by-step guide for replacing the internal fuse.

Technical Data and Specifications

Technical Data

Key technical specifications of the VC 260 multimeter.

Measurement Tolerances

Accuracy and resolution for various measurement ranges.

Overload Protection

Information on input limits and overload protection.

VOLTCRAFT VC 260 Specifications

General IconGeneral
TypeDigital Multimeter
Frequency Range10Hz to 10MHz
Continuity testYes
Diode testYes
Measurement CategoryCAT III 600 V
DisplayLCD
Basic accuracy0.5 %
Measurement FunctionsDC Voltage, AC Voltage, DC Current, AC Current, Resistance, Capacitance, Frequency, Continuity, Diode
DC Voltage Range200mV to 600V
AC Voltage Range200 V - 600 V
DC Current Range200 µA - 10 A
AC Current Range200μA to 10A
Battery9V Battery

Related product manuals