Operating Elements
(Illustration see fold-out page)
1a 20A – input This measuring input is secured by 10A (fuse) and
has been approved for the connection to direct and alternating
currents of up to max. 20A (for a max. period of 10s with pau-
ses of 15min between the single measurements).
1b µA/mA – input At this input, direct and alternating currents of
up to max. 400mA can be measured (secured by a quick-
acting 500mA-A fuse).
1c COM (–) – input socket (COM or negative connection)
1d V – (+) – input socket (= positive connection) for the other mea-
surements
2 Rotary switch (= measurement function switch) for setting the
different measuring functions
3 Push buttons for the functions "RESET" and reference value
measurement, "SELECT" for switching from DC to AC and "H"
in the rotary switch for HOLD = holding a measurement value
4 Solar cell for buffering the capacitor
5 Digital display (4000 counts) with display symbols for the mea-
suring units and functions
6 Rubber case
28
To Next Page
Loading...
