EasyManua.ls Logo

VOLTCRAFT DO-101 - User Manual

VOLTCRAFT DO-101
92 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Bedienungsanleitung
Messgerät für gelösten Sauerstoff DO-101
Best.-Nr. 1668324 Seite 2 - 23
Operating instructions
DO-101 dissolved oxygen meter
Item No. 1668324 Page 24 - 45
Notice d’emploi
Appareil de mesure d’oxygène dissous DO-101
N° de commande 1668324 Page 46 - 67
Gebruiksaanwijzing
Meetinstrument voor opgeloste zuurstof DO-101
Bestelnr. 1668324 Pagina 68 - 89

Table of Contents

Questions and Answers

  • S
    Stephanie RodriguezAug 4, 2025
    How to fix VOLTCRAFT DO-101 Measuring Instruments when it does not respond?
    • A
      Amanda JohnsonAug 4, 2025
      If your VOLTCRAFT Measuring Instruments device isn't responding to keystrokes, it could be that the processor is overloaded. To fix this, use a thin pin (like a needle or paper clip) to press the “RESET” button on the side of the device, located under the side cover. This will reset the processor and turn off the meter. You can then turn the meter back on normally.
  • C
    Clarence HenryAug 18, 2025
    Why the measured value on my VOLTCRAFT DO-101 Measuring Instruments isn't changing?
    • H
      harrispamAug 18, 2025
      If the measured value on your VOLTCRAFT Measuring Instruments device isn't changing, it might be because the HOLD function is enabled. To resolve this, simply press the “HOLD” button.

Summary

Product Introduction

Understanding Manual Symbols

Intended Use and Applications

Package Contents and Delivery

Critical Safety Instructions

Device Overview and Components

Detailed Product Description

Powering the DO-101 Meter

Battery Replacement Guide

Step-by-step guide for replacing the device's 9V battery.

Optional Power Supply Connection

Initial Device Setup

Electrolyte Filling and Replacement

Detailed procedure for filling or replacing the electrolyte in the probe head.

Probe Connection Procedure

Turning the Meter On and Off

Configuring Advanced Presets

Performing Measurements

Calibration Procedure for Accuracy

Procedure for calibrating the meter to ensure accurate dissolved oxygen readings.

Measuring Dissolved Oxygen in Water

Measuring Oxygen Saturation in Air

Using the Hold Function

Recording Min;Max Measurement Peaks

Automatic Shut-Off Feature

Display Backlight Control

RS232 Data Interface

Cleaning and Maintenance

General Maintenance Advice

General advice on meter maintenance, calibration frequency, and safety checks.

Cleaning the Device Casing

Specific instructions on how to clean the meter's exterior safely and effectively.

Cleaning the Measurement Probe

Procedure for cleaning the dissolved oxygen probe after use.

Product and Battery Disposal

Troubleshooting Common Issues

Technical Specifications

VOLTCRAFT DO-101 Specifications

General IconGeneral
Product typeDigital Multimeter
Measurement FunctionsVoltage, Current, Resistance
Measurement CategoryCAT III 600V
WeightApprox. 350 g
DC Voltage Range200 mV to 600 V
DC Current Range200 µA to 10 A
Resistance Range200 Ω to 20 MΩ
DisplayLCD
Battery9V
Basic accuracy±1%
Measurement RangeVaries by function
ResolutionVaries by function

Related product manuals