34
Software installation
1. Insert the CD into the CD-ROM of your computer.
2. The installation will start automatically. If not, please go to your CD-ROM directory and open the
installation file “autorun.exe”.
3. Select your desired language from German, English and French.
4. Follow the instructions on the dialog box, select the destination for the installation and complete the
installation.
5. For further information, please refer to the operating instructions on the CD provided.
Note: It is available to keep software update to the latest version as Voltsoft program is running and inter-
net access is connected; or check the latest version information of Voltsoft update via
"http://www.conrad.com"
Maintenance and cleaning
General
Apart from occasional cleaning and battery replacements, the measurement device requires no servicing.
The battery change is described below.
Regularly check the technical safety of the device e.g. for damage to the hou-
sing, etc.
Cleaning
Always observe the following safety instructions before cleaning the device:
Live components may be exposed if covers are opened or parts are removed
(unless this can be done without tools).
Before cleaning or repairs, a connected electric device must be disconnected from
the measurement device and the measurement device itself disconnected from the
mains socket.
Do not use any carbon-containing cleaning agents or petrol, alcohol or the like to clean the product. These
could corrode the surface of the measuring instrument. The fumes are furthermore a health hazard and are
explosive. Moreover, you should not use sharp-edged tools, screwdrivers or metal brushes or similar for
cleaning.
To clean the device or the display, use a clean lint-free anti-static and dry cleaning cloth.
To Next Page
Loading...
