VOLTCRAFT LCR-100 User Manual

80 pages

Go to English

To Next Page

Impressum

Dies ist eine Publikation der Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

Alle Rechte einschließlich Übersetzung vorbehalten. Reproduktionen jeder Art, z. B. Fotokopie, Mikroverlmung, oder die Erfassung in

elektronischen Datenverarbeitungsanlagen, bedürfen der schriftlichen Genehmigung des Herausgebers. Nachdruck, auch auszugsweise,

verboten. Die Publikation entspricht dem technischen Stand bei Drucklegung.

IMPORTANT NOTE

VERSION 11/15

LCR MEASURING DEVICE LCR-100

ITEM NO.: 101392

Dear Customer,

Unfortunately, we made a mistake when producing the operating instructions. The following table contains the

corrected values of the affected section.

Inductance

Range Resolution Accuracy Measuring frequency

11 mH 0.001 mH ±(2.0% + 0.4 mH)

approx. 1 kHz

110 mH 0.01 mH ±(5.0% + 6 mH)

11 H 0.001 H

±(5,0% + 15d) approx. 100 Hz

20 H 0.01 H

Overload protection: 36 V/AC-DC

We thank you very much for your understanding and apologize for any inconvenience this may cause to you.

Your VOLTCRAFT team

Legal notice

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data processing

systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the technical status at the

time of printing.

WICHTIGER HINWEIS

VERSION 11/15

LCR-MESSGERÄT LCR-100

BEST.-NR.: 101392

Lieber Kunde,

Leider ist uns bei der Erstellung der Bedienungsanleitung ein Fehler unterlaufen. Der betroffene Abschnitt mit

korrigierten Angaben nden Sie in der nachfolgenden Tabelle.

Induktivität

Bereich Auösung Genauigkeit Messfrequenz

11 mH 0,001 mH ±(2,0% + 0,4 mH)

ca. 1 kHz

110 mH 0,01 mH ±(5,0% + 6 mH)

11 H 0,001 H

±(5,0% + 15d) ca. 100 Hz

20 H 0,01 H

Überlastschutz: 36 V/AC-DC

Vielen Dank für Ihr Verständnis und wir entschuldigen uns für eventuelle Unannehmlichkeiten.

Ihr VOLTCRAFT-Team

Questions and Answers:

E
Eric JohnsonAug 2, 2025
Why do measuring values change on my VOLTCRAFT LCR-100 Measuring Instruments?
- N
  Nicholas MathewsAug 3, 2025
  If the measuring values are changing on your VOLTCRAFT Measuring Instruments, make sure the correct measuring function is active. Check the display and switch the function if needed. Also, verify that you're using the correct measuring sockets by checking the measuring inputs. Finally, if the “HOLD” function is activated (indicated by “HOLD” on the display), deactivate it by pressing the “HOLD” button.
I
Isabella JamesAug 17, 2025
What to do if my VOLTCRAFT LCR-100 shows no measuring value change?
- E
  Eric WilliamsAug 17, 2025
  If your VOLTCRAFT Measuring Instruments shows no change in the measuring value, there might be several reasons: 1. The wrong measuring function might be active. Check the display and switch the function if needed. 2. Incorrect measuring sockets might be in use. Verify that you are using the correct measuring inputs. 3. The HOLD function could be activated (displaying “HOLD”). If so, press the “HOLD” button to deactivate this function.