EasyManua.ls Logo

VOLTCRAFT HS-100 - Care and Cleaning; Rechargeable Batteries; Technical Data

VOLTCRAFT HS-100
8 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2023 by Conrad Electronic SE. *2176564_2178480_v3_0923_02_dh_mh_en
b) Hold
1. Press the [hold] button to pause the weight reading.
2. Press any button to release the hold.
The symbol will appear on the display (2) in to indicate the hold function is being
used.
c) Tare/Zero
This function can be used for weighing substances that require being put into a container such
as powder or liquids.
Put the empty container over the hook, wait a few moments for the reading to stabilize, then
press the tare button.
The display (2) will return to “0.0”.
Place/pour any objects/liquid to be weighed into the container.
d) Change Unit of Measurement
Press the unit button to switch between kg and lb units of measurement.
Care and Cleaning
Disconnect any loads from product before each cleaning.
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
Clean the product with a dry, bre-free cloth.
Disposal
a) Product
This symbol must appear on any electrical and electronic equipment placed on the
EU market. This symbol indicates that this device should not be disposed of as
unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back
of waste. Conrad provides the following return options free of charge (more details on our
website):
in our Conrad ofces
at the Conrad collection points
at the collection points of public waste management authorities or the collection points set
up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in
countries outside of Germany.
b) (Rechargeable) batteries
Remove batteries/rechargeable batteries, if any, and dispose of them separately from the
product. According to the Battery Directive, end users are legally obliged to return all spent
batteries/rechargeable batteries; they must not be disposed of in the normal household waste.
Batteries/rechargeable batteries containing hazardous substances are labelled with
this symbol to indicate that disposal in household waste is forbidden. The abbrevia-
tions for heavy metals in batteries are: Cd = Cadmium, Hg = Mercury, Pb = Lead
(name on (rechargeable) batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our
stores or wherever (rechargeable) batteries are sold. You thus full your statutory obligations
and contribute to environmental protection.
Batteries/rechargeable batteries that are disposed of should be protected against short circuit
and their exposed terminals should be covered completely with insulating tape before disposal.
Even empty batteries/rechargeable batteries can contain residual energy that may cause them
to swell, burst, catch re or explode in the event of a short circuit.
Technical Data
a) General
Input voltage .........................................2 x 1.5 V AA batteries
Current consumption ............................ On: 15 mA
Off: 10 µA
Accuracy ............................................... ±0.5 %
Data lock function .................................yes
Tare function .........................................yes
Material ................................................. Hooks: Stainless steel
Housing: Stainless steel and ABS
Units .....................................................kg, lb
Automatic power off ..............................120 s
LCD ...................................................... Size: 51 x 21 mm
LCD Backlight ....................................... yes
Operating conditions ............................. 0 to +30 °C (<75% RH)
+30 to +40 °C (<50% RH)
(non-condensing)
Storage conditions ................................ -10 to +30 °C (<75% RH)
+30 to +50 °C (<50% RH)
(non-condensing)
Operating altitude .................................0 - 2000 m
Dimensions (W x H x D) ....................... 82 x 152 x 37 mm (without hooks)
Weight .................................................. 542 g (without battery, incl. 2x hooks)
b) Item No. 2176564
Capacity ................................................max. 300 kg (min. 500 g)
Resolution .............................................200g
c) Item No. 2178480
Capacity ................................................max. 100 kg (min. 500 g)
Resolution .............................................100 g

Related product manuals