EasyManuals Logo

Voltech SBC-1205 User Manual

Voltech SBC-1205
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Warning :
This battery charger is designed for charging 12V lead acid 5-120Ah batteries.
Do not use this battery charger for any other purpose.
Explosion hazard: A battery being charged can emit explosive gases.
Avoid smoking or open sparks or naked flames in the vicinity of the battery.
Do not cover battery charger while charging. Allow good ventilation.
If your skin or eyes come into contact with acid immediately rinse the affected part with excessive
water and seek medical attention.
Do not charge a frozen battery.
Do not charge a damaged battery
Disconnect battery from charger when it is not AC powered.
Do not charge non-rechargeable batteries.
If the cord is damaged, the battery charger is not be used.
When charging for long periods of time check the battery charger frequently.
Operation
Charging Mode
Motorcycle Mode
e 14.4V / 1.5A max.
Battery capacities of 5 - 14 Ah
Car Mode
f 14.4V / 5A max
Battery capacities of 16 - 120 Ah
Low Temperature Charging Mode
g 14.7V / 5A max
Battery capacities of 16 – 120Ah
Recommended for temperature below 10°C
Not recommended for long term maintenance when temperature exceeds
10°C at times
Plug in the battery charger to AC mains (100 - 240V) wall socket.
The indicators light up one by one as battery charger goes through a series of self checks. When the
checking is complete the “Standby” indicator will come on.
Connect the red lead to the positive battery terminal and the black lead to the negative battery
terminal.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Voltech SBC-1205 and is the answer not in the manual?

Voltech SBC-1205 Specifications

General IconGeneral
BrandVoltech
ModelSBC-1205
CategoryBattery Charger
LanguageEnglish

Related product manuals