Smart Charger SBC - 1205
User’s Manual
Introduction
The SBC-1205 is a Switch Mode Battery Charger with MCU controlled charging. Maximum charge is
achieved through 4 stage charging (Precondition, Bulk, Absorption and Float charge stages). This
charger is suitable for 5Ah - 120Ah 12V lead acid batteries including GEL and AGM. Another excellent
feature is a sealed splash proof IP-55 rated polycarbonate casing.
**Please read this manual carefully and follow the instructions**
Features
1. 4 Stage Smart Battery Charger .
A. Pre charge - Battery analysis.
B. Bulk - Constant Current charge.
C. Absorption - Constant Voltage Pulse charge.
D. Float - Charge maintain.
2. Motorcycle, Car, and Low Temperature (< 10°C) charge modes.
3. Easy one button charge selection.
4. Can be permanently connected to the battery.
5. Output short circuit and reverse polarity protection.
6. Dust & Splash proof IP-55 construction with poly-carbonate casing.
7. Over Temperature Protection.
8. Smart battery charging is achieved with internal Microcomputer Unit (MCU). Condition of the
battery is analyzed before charging starts and is monitored constantly during charging.
Contents
● Smart Battery Charger with lead terminals.
● Detachable leads with protection cover & crocodile clips.
● Detachable leads with protection cover & ring terminals.
To Next Page
Need help?
General
