What to do if my Voltronic Power Giant 3P/3P shows an overload?
If your Voltronic Power UPS indicates an overload, the first step is to reduce the amount of equipment drawing power from it. Disconnect some of the non-essential devices to bring the load within the UPS's specified capacity.
How to fix over temperature on Voltronic Power Giant 3P/3P UPS?
If your Voltronic Power UPS is experiencing an over temperature issue, you should remove some of the connected loads to reduce the heat generated. Also, make sure that the UPS has adequate ventilation and is not obstructed.
General| Brand | Voltronic Power |
|---|---|
| Model | Giant 3P/3P |
| Category | UPS |
| Language | English |
Describes the UPS as a double conversion system providing continuous power.
Details the system components like REC, INV modules, and static bypass.
Introduces the different operating modes of the UPS system.
Explains warning conventions and symbols used throughout the manual.
Provides crucial safety guidelines for installation, handling, and operation.
Outlines environmental requirements like temperature, humidity, and altitude for installation.
Provides step-by-step instructions for safely removing the UPS from packaging.
Instructs on adjusting leveling feet to fix the UPS position after placement.
Details how to remove the terminal cover and shows terminal layouts for different models.
Introduces the various communication interfaces available on the UPS.
Shows diagrams of switch and breaker configurations for different UPS models.
Provides step-by-step instructions for turning on the UPS.
Outlines the steps for safely shutting down the UPS.
Explains how to operate the UPS in maintenance bypass mode.
Groups panel, LEDs, buttons, and buzzer functions.
Covers initialization, main page, and basic navigation of the LCD.
Covers main menu options like Control, Measurement, Setting, Alarm, Data Log.
Details specific setting parameters like Basic, Information, and Advanced.
Outlines routine checks for indicators, LCD, buttons, ventilation, and wiring.
Provides guidelines for battery maintenance to prolong its lifecycle.
Lists warning codes and the corresponding actions to resolve them.
Lists fault codes and the corresponding actions to resolve them.
Details specifications related to the UPS line input, including voltage and current.
Lists specifications for the battery system, such as numbers and voltage.
Provides specifications for the inverter output, including waveform and efficiency.
Details specifications for the bypass function, such as voltage range and transfer time.
To Next Page