Need help?Do you have a question about the Voltronic Power 1K and is the answer not in the manual?
General| Category | UPS |
|---|---|
| Output Power | 800W |
| Input Voltage | 230 VAC |
| Waveform (Batt. Mode) | Simulated Sine Wave |
| Power Rating | 1000VA/800W |
| Input Voltage Range | 170-280 VAC |
| Frequency Range | 50/60Hz ±5Hz |
| Output Voltage | 230 VAC |
| Battery Voltage | 12 VDC |
| Recharge Time | 4-6 hours recover to 90% capacity |
| Protection | Overload |
| Communication Interface | USB, RS232 |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -15-50 °C |
| Humidity | 5% to 95% (non-condensing) |
| Model | Voltronic Power 1K |
Guidelines for safely transporting the UPS system in its original packaging to prevent damage.
Instructions for preparing the UPS for installation, including acclimatization and environmental considerations.
Critical instructions for installing the UPS, including power connections and load limitations.
Key safety precautions to follow during the operation of the UPS system.
Safety measures for maintenance, service, and handling faults, emphasizing electrical shock hazards.
Diagrams illustrating the rear panel connections for various UPS models and outlet types.
Step-by-step guide for connecting input/output power, communication ports, and installing software.
Details the functions of the ON/Mute, OFF/Enter, and Select buttons for UPS control.
Explanation of the UPS LCD panel display elements and their meanings.
Description of audible alarm patterns for different UPS states like low battery or overload.
Reference for abbreviations shown on the LCD, with their corresponding meanings.
Guide to setting UPS parameters such as output voltage, ECO mode, and bypass settings.
Explanation of the UPS's operating modes (Online, ECO, Battery, Bypass, Standby) and their LCD indicators.
List of fault codes, their descriptions, and associated icons for diagnosing UPS issues.
Information on warning indicators, their flashing patterns, and associated alarms.
To Next Page