Need help?Do you have a question about the Volvo Penta 5.0 GXi and is the answer not in the manual?
General| Engine Type | V8 |
|---|---|
| Displacement | 5.0 L (305 cu in) |
| Horsepower | 270 hp |
| Cooling System | Closed-loop cooling |
| Ignition System | Electronic |
| Cylinders | 8 |
| Compression Ratio | 9.4:1 |
| Max RPM | 5000 RPM |
| Fuel System | Multi-point fuel injection |
| Alternator | 75 amps |
| Type | Gasoline |
| Max Power | 270 hp |
| Bore | 3.74 inches |
| Stroke | 3.48 inches |
Explains how to identify the unit using product identification plates and decals.
Procedure to restore engine power and performance through analysis and correction.
Diagnostic procedure to assess engine condition via vacuum readings.
Specifies required gasoline octane and type for optimal performance and warranty.
Covers oil type, checking level, and change intervals for engine lubrication.
Steps for preparing the engine for storage to prevent damage.
Procedure for the first 20 hours of operation to ensure maximum performance and engine life.
Provides an overview of engine components like the block and cylinder heads.
Lists necessary equipment and special tools for performing service procedures safely and efficiently.
Details the removal, inspection, and installation of the crankshaft.
Procedures for cleaning and inspecting the crankshaft and its bearings for wear or damage.
Steps for cleaning and inspecting the engine block, including bores and passages.
Technical data and tolerances for the 5.0L engine model.
Technical data and tolerances for the 5.7L engine model.
Torque values and sequences for various fasteners across engine components.
Catalog of specialized tools required for specific service procedures.
General advice on safe boating practices and user awareness for marine products.
Specific safety guidelines and precautions for mechanics working on marine engines.
Precautions for safely handling and charging lead-acid batteries, including charging procedures.
Critical safety instructions for handling gasoline to prevent fire and explosion hazards.
To Next Page