EasyManua.ls Logo

Volvo Penta D13-550 User Manual

Volvo Penta D13-550
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATOR’S MANUAL
D13
MCC
Question and Answer IconNeed help?

Do you have a question about the Volvo Penta D13-550 and is the answer not in the manual?

Volvo Penta D13-550 Specifications

General IconGeneral
Engine ModelD13-550
Cylinders6
Power Output550 hp
Compression Ratio17.5:1
AspirationTurbocharged and aftercooled
Fuel SystemCommon rail
Engine TypeDiesel
Displacement12.8 L
Max RPM2300 rpm
Bore131 mm
Stroke158 mm
Emissions ComplianceIMO Tier II
Cooling SystemFreshwater cooled with heat exchanger

Summary

Safety Information

General Safety Precautions

Explains safety symbols and text prioritization in the manual.

Instruments and Controls

Marine Commercial Control (MCC) System

Overview of the MCC system, its units, and functions.

MCU Panel Overview and Alarms

Identifies MCU panel components and explains alarm indicators.

Working Modes and Statistics

Details working modes (Local, PRP, Off) and statistics access.

Alarm List Display

Explains how alarm lists are displayed when faults occur.

Starting

Pre-Start Checks and Warnings

Essential pre-start checks and warnings, including about start spray.

Engine Starting Procedure

Detailed steps for starting the engine and troubleshooting readiness.

Operation

General Operation and Alarm Handling

Safe operation guidance and procedures for acknowledging alarms.

Maneuvering Procedures

Step-by-step instructions for shifting between ahead and astern.

Engine Shutdown

Engine Stop and Shutdown Checks

Procedures for normal/emergency stop and post-shutdown checks.

Fault Handling

Message Interpretation and Malfunction Impact

How the system warns of malfunctions and their effect on engine performance.

Fault Tracing: Symptoms and Causes

Table of common symptoms and their potential causes for troubleshooting.

Fault Code Register

In Case of Emergency

Emergency Scenarios and Fault Alarms

Covers potential engine issues and fault alarms in emergencies.

Starting Using Auxiliary Batteries

Detailed instructions and safety warnings for jump-starting.

Maintenance Schedule

First Service Inspection (FSI)

Specifies tasks and intervals for the first service inspection.

Maintenance

Maintenance Overview and Component ID

Maintenance overview, safety, and component identification for D13B MH.

Oil Level, Filters Change

Procedures for checking oil level and changing oil/by-pass filters.

Related product manuals