Friction brake
The control has a friction brake which can be ad-
justed as necessary to provide lighter or heavier lever
action.
Adjusting the friction brake:
1. Stop the engine.
2. Mover the control lever forwards so that the groo-
ve in the hub of the control lever is accessible.
3. Position a screwdriver in the groove and remove
the plug.
4. Adjust the friction brake (8 mm wrench):
Clockwise = heavier lever action
Counter clockwise = lighter lever action.
5. Reinstall the plug.
39
Controls
To Next Page
Loading...
Need help?
General
