EasyManuals Logo

Volvo Penta TAD1642GE-B User Manual

Volvo Penta TAD1642GE-B
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
Engine Fuel Filter Replacement
WARNING!
Fire hazard. When carrying out work on the fuel system
make sure the engine is cold. A fuel spill onto a hot
surface or an electrical component can cause a fire.
Store fuel soaked rags so that they cannot cause fire.
IMPORTANT:
Do not fill the new fuel filter with fuel before assembly.
There is a risk that contamination could get into the
system and cause malfunctions or damage.
1 Clean round the fuel filter.
2 Remove the filter with a suitable filter remover.
Collect any spilled fuel in a collection vessel.
3 Clean the filter mating surface on the filter bracket.
4 Lubricate the seal with diesel fuel and install the
new fuel filter. Tighten the fuel filter in accordance
with the instructions on the fuel filter.
5 If necessary, vent the fuel system, please refer to
Fuel system, bleeding, page 76.
Maintenance
74 47711296 01-2019 © AB VOLVO PENTA

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Volvo Penta TAD1642GE-B and is the answer not in the manual?

Volvo Penta TAD1642GE-B Specifications

General IconGeneral
BrandVolvo Penta
ModelTAD1642GE-B
CategoryEngine
LanguageEnglish

Related product manuals