Need help?Do you have a question about the Volvo Penta TAMD41 and is the answer not in the manual?
General| Engine Type | Diesel |
|---|---|
| Configuration | Inline |
| Aspiration | Turbocharged |
| Fuel System | Direct injection |
| Cylinders | 6 |
| Compression Ratio | 17.5:1 |
| Max Torque | 420 Nm |
| Bore | 92 mm |
Steps for starting, turbo warning, and KAD42/KAMD42 compressor info.
Covers daily oil, coolant, belt checks and bi-weekly gear oil, fuel filter checks.
Details drive oil, reverse gear, belts, air filter, pump impeller, and fuel filter replacement.
Guides for winterizing engine, cooling systems, and other components.
Covers pre-launch checks, hull painting, fuel bleeding, and propeller fitting.
A table for diagnosing common engine starting and performance issues.
Details service intervals for daily, monthly, annual, and extended use in commercial operations.
Details engine oil and filter change procedures, intervals, and the benefits of genuine parts.
Procedure for flushing and inhibiting seawater cooling systems for storage.
Covers flushing with coolant, cleaning filters, and protecting the system for longer periods.
Explains the process for inhibiting fresh water cooling systems and their components.
Covers checking coolant freezing point, topping up, and verifying drain cock closure.
Details impeller replacement intervals, keeping spares, and proper storage during lay-up.
Covers inspection of hoses for cracks, replacement of worn hoses, and tightening clamps.
Details safety, oil selection, replacement procedure, and identifying water contamination in the drive/gear oil.
To Next Page
