Need help?Do you have a question about the Volvo Penta TAMD41M-A and is the answer not in the manual?
General| Number of Cylinders | 6 |
|---|---|
| Max RPM | 3800 rpm |
| Fuel System | Direct Injection |
| Aspiration | Turbocharged |
| Compression Ratio | 17.5:1 |
| Cooling System | Water-cooled |
| Weight | 500 kg |
| Power Output | 200 hp (149 kW) |
Guidance on the manual's structure, content, and intended audience.
Lists and describes specialized tools and equipment required for engine maintenance.
Guides users to locate and understand engine identification and certification plates.
Covers engine types, general operation, specifications, and major system descriptions.
Detailed specifications for cylinder block, heads, pistons, rings, liners, valves, camshaft, crankshaft, and bearings.
Covers general procedures, engine removal, fixture attachment, and initial component disassembly.
Detailed steps for cylinder head reconditioning, leakage checks, valve systems, and cylinder block service.
Procedures for inspecting, installing, and reconditioning crankshaft, pistons, connecting rods, and bearings.
Instructions for tensioning drive belts and performing pre-start and post-start checks.
To Next Page