Service Information
Document Title: Function Group: Information Type: Date:
Engine, identification 200 Service Information 2014/8/27
Profile:
ART, A35E FS [GB]
Engine, identification
Identification plate 1
Engine designation, serial number, part number and assembly plant are stamped in one field on the engine block's left rear
edge
Identification plate 2
A decal with the software's ID-number, the engine's serial number and assembly plant is located on the valve cover to
ensure installation of correct ECU on the engine in production. On the back of the ECU, there is a decal indicating its
hardware number.
Assembly plants:
A = Skövde, Sweden
E = Curitiba, Brazil
F = Flen, Sweden
L = Lyon, France
Identification plate 3
The certification decal is located on the valve cover as well as on the left side of the machine's front frame.
Figure 1
Engine identification, D12D
To Next Page
Loading...
