Volvo D12D - E-ECU Replacement; Changing Pre-programmed ECU

Service Information
Document Title: Function Group: Information Type: Date:
E-ECU, MID 128, changing
pre-programmed ECU
200 Service Information 2014/8/27
Profile:
ART, A35E FS [GB]
E-ECU, MID 128, changing pre-programmed ECU
Op nbr 200-070
This operation also includes required tools and times for applicable parts of the following operations:

200 E-ECU, MID 128, changing non-programmed ECU
1. Connect VCADS Pro computer and perform 17030-3 Parameter, programming.
 Use the function: Save all read parameters to job card.
2. Perform step 2–14.
200 E-ECU, MID 128, changing non-programmed ECU
3. Connect VCADS Pro computer and perform 17030-3 Parameter, programming.
 Program earlier read-out parameters according to the job card.