27
Hydraulic connectors quality
ORFS (O Ring Face Seal) technology is used on most
hydraulic connectors to ensure 100% certain leak
tightness. It provides an excellent resistance to pressure
peaks, vibrations and twisting.
Customer Benefit
No risk of leakage for more safety along with lower
operating and maintenance costs. 050
•
Hydraulic oil cooler
The hydraulic oil cooler, mounted on a slideway, is part
of the standard equipment. It permits efficient cooling of
the hydraulic oil, and prevents risks of overheating, even
during intense, prolonged work. It provides easy access
and can be easily cleaned and rotated by only removing
two screws.
Customer Benefit
The machine’s high performance is maintained even after
several hours of intense work, for better productivity. 066
•
ISO / SAE control pattern change
and travel alarm
ISO / SAE control pattern change lever is located on the
upper frame below the machine left side panel. Pattern
change can be performed very easily and quickly from the
outside.This option is combined with travel alarm option to
prevent people of machine’s movements on the jobsite.
Customer Benefit
More versatility.
More operator comfort.
More safety. 071
•
•
•
Right side accessibility
For easy maintenance on the machine, just remove one
panel with 5 bolts to gain full access to the main control
valve, hydraulic oil cooler, hydraulic hoses etc...
Customer Benefit
Low maintenance and operating costs. 074•
To Next Page
Loading...