32
Operator’s Environment
Heating system
Cab heating system has 2 heating vents: one dedicated
for front window defrosting and a second dedicated to the
operator’s side. The heating control is in the cab, within
the operator’s reach.
Customer Benefit
More operator comfort with less fatigue when operating
in poor weather, leading to more productivity. 039
•
Safe access to the driving position
The door has a wide opening and the console fully retracts
to make entering and exiting the cab easier for the operator.
One wide handhold in front of the cab, one inside the cab
and a non-slip cab step provides safe, 3-point cab access
when entering or exiting the cab / canopy.
Customer Benefit
Easy and safe cab entry and exit thanks to 3 safe grip
points.
More safety.
042
•
•
Integrated cab tool box
Tool box, located below the operator’s seat, is
thermoformed into the cab platform to give each tool a
dedicated position. It can be locked with the ignition key.
Machine’s operator manual can be stored into the opening
tool box door. A 12V electrical outlet is also located inside
the tool box to plug an additional portable work light. All
tools and documents are safely stored inside the cab.
Customer Benefit
More operator comfort. 046•
Cab electrical power socket
Two 12V electrical power sockets are located inside the
cab. One socket is inside the tool box and one is located
on the rear side of the cab. These power sockets are used
for electrical devices such as a mobile phone charger or to
supply electricity to a lamp or extra rotating beacon.
Customer Benefit
More operator comfort. 047•
To Next Page
Loading...