Receive dryer
Receive dryer
- Is a kind of reservoir to store excess liquid refrigerant in the system.
- Is a strainer or filter to remove particles from the system.
- Has desiccant to absorb moisture from the refrigerant.
- Has a built in pressure switch to protect system from excessive high or low pressure.
1. Desiccant
2. Filter
3. Baffle plate
4. Inner tube
5. Outlet port
6. Inlet port
7. Pressure switch
- Low pressure OFF : 2.0 +/- 0.2 kgf/cm^2
- High pressure OFF : 32 +/- 2 kgf/cm^2
Picture text:
To Next Page
Loading...
