Shiftlock override button
Shiftlock release
The gear selector is locked in the (P)ark position. To manually release the shiftlock:
· Turn the starting (ignition) key to position I
· Press firmly on the "SHIFTLOCK OVERRIDE" button located at the base of the gear selector
· While holding the override button down, press the button on the front of the gear selector
· Move the selector from the (P)ark position.
Manually operating the fuel filler door
If the fuel filler door does not unlock together with the central locking system:
- Remove the plastic cover in the storage area on the left side of the trunk.
file:///K|/ownersdocs/2001/2001_SV40/01sv40_06b.htm (8 of 9)12/30/2006 3:49:24 PM
To Next Page
Loading...
Need help?
General
