pg. 136 Cassette
Cassette opening
Slide cassette into the cassette opening with the tape to the right (side 1 or A upwards). TAPE A or
TAPE B is displayed. When one side has finished playing, the unit will automatically begin playing the
other side. If a cassette is already installed in the cassette deck, select cassette play by turning the
"SOURCE" knob.
Tape eject
If you press the button, the tape stops and the cassette is ejected. To select a new program source turn
the "SOURCE" knob. The cassette can be inserted or ejected even when the unit is switched off.
Dolby B Noise reduction
The function is preset. Carry out the following if you wish to switch it off: hold the button
depressed
until the Dolby symbol in the display goes out. Press the same button again to reactivate the Dolby
function.
A - Fast winding
The tape can be wound forward with "
" and backwards with " ". During fast winding
"FF" (forward) respectively "REW" (backward) is displayed. Fast winding is interrupted if you press the
button again.
B - Next track, Previous track
file:///K|/ownersdocs/2001/2001_SV40/01sv40_10.htm (7 of 13)12/30/2006 3:49:30 PM
To Next Page
Loading...
Need help?
General
