09 Maintenance and service
Car care
09
369
2. A light sanding with very fine abrasive
material can be performed locally before
painting if necessary (e.g. if there are rough
edges). Clean the surface thoroughly and
allow to dry.
3. Stir the primer well and apply using a fine
brush, matchstick or similar. Finish with
base coat and clear coat once the primer
has dried.
4. For scratches, proceed as above, but
mask around the damaged area to protect
the undamaged paintwork.
NOTE
If the stone chip has not penetrated down
to the meal and an undamaged layer of paint
remains in place, fill in with base coat and
clear coat as soon as the surface has been
cleaned.
To Next Page
