03 Instruments and controls
03
78
* Option/accessory, for more information, see Introduction.
approx. 10 °C. Activate/deactivate the func-
tion in the menu system MY CAR (p. 103).
Light switches
The headlamp control activates and adjusts
the external lighting. It is also used to adjust
the display, instrument and passenger com-
partment lighting.
Overview, light switches
Overview, light switches.
Thumbwheel for adjusting display and
instrument lighting as well as ambient
lighting*
Button for rear fog lamp
Knob for daytime running lights and park-
ing lamps
Thumbwheel
20
for headlamp levelling
Knob positions
NOTE
The same lamps are used for daytime run-
ning lights and position/parking lamps
front. The brightness is higher when the
lamps are used as daytime running lights.
Posi-
tion
Specification
Daytime running lights
A
when
the car's electrical system is in
key position II or the engine is
running.
Main beam flash can be used.
Daytime running lights, side
marker lamps front and posi-
tion/parking lamps/side marker
lamps rear when the car's elec-
trical system is in key position II
or the engine is running.
Automatic switching to posi-
tion/parking lamps/side marker
lamps when the car is parked.
Main beam flash can be used.
20
Not available for cars equipped with active Xenon headlamps*.
To Next Page
