PARKING ASSISTANCE SYSTEMS
Park Assist Pilot (PAP)*
PAP assists in parking or leaving a parking space by e.g., scanning a
potential parking space and thereafter controlling the steering wheel to
guide the vehicle into the space. The driver’s task is to check the area
around the vehicle, follow the instructions in the center display, select
the appropriate gear, control the vehicle’s speed, apply the brakes and
stop the vehicle.
Parking with Park Assist Pilot
1. Tap Park In in the center display's Function view. The
vehicle’s speed may not exceed 20 mph (30 km/h) dur-
ing parallel parking or 12 mph (20 km/h) during perpen-
dicular parking. The distance between the vehicle and
the parking space must be 1.6-5 ft (0.5–1.5 m).
2. Stop the vehicle when prompted by a graphic and text in
the center display when a suitable parking space has
been detected. A pop-up window will appear.
3. Follow the instructions on the center display and be pre-
pared to stop the vehicle when prompted to do so.
Leaving a parking space
This function can only be used when the vehicle has been parallel
parked.
1. Tap Park out in the center display's Function view.
2. Follow the instructions provided.
Park Assist Camera (PAC)*
This camera helps the driver see what is around the vehicle
and to indicate potential obstructions using a camera image
and graphics in the center display. The camera view and guid-
ing lines can be selected in the center display. The camera can
be started automatically when reverse gear is selected. This
setting is made in the center display's Top view under
Settings.
–
Select My Car Park Assist Auto Camera Reverse Activation.
The camera can also be started manually:
–
Tap the Camera icon in the center display's Function view to acti-
vate/deactivate the camera.
To Next Page
Loading...
