KEY, LOCKS AND ALARM
}}
* Option/accessory.
261
Activating and deactivating child
safety locks
The child safety locks prevent children from
being able to open a rear door from the inside.
There is an electric* and a manual lock.
Activating and deactivating electrically*
The electric child safety locks can be activated
and deactivated in all ignition positions higher
than 0. Activation and deactivation can be per-
formed up to 2 minutes after switching off the
engine, provided that no door is opened.
Button for electric activation and deactivation.
1. Start the engine or choose an ignition posi-
tion higher than 0.
2. Press the button in the driver's door control
panel.
> The driver display shows the message
Rear child lock Activated and the but-
ton's lamp illuminates - the locks are
active.
When the electric child safety lock is active then
the rear:
•
windows can only be opened with the driver's
door control panel
•
doors cannot be opened from inside.
To deactivate the locks:
–
Press the button in the driver's door control
panel.
> The driver display shows the message
Rear child lock Deactivated and the
button's lamp goes out - the locks are
deactivated.
The current setting is stored when the engine is
switched off - if the child safety locks are acti-
vated at engine shutdown, the function will
remain activated the next time the engine is
started.
Symbol Message Specification
Rear child
lock Acti-
vated
Child safety
locks are acti-
vated.
Rear child
lock Deacti-
vated
Child safety
locks are deacti-
vated.
Activating and deactivating manually
Manual child safety locks. Not to be mixed up with man-
ual door locks.
–
Use the remote control key's detachable key
blade to turn the knob.
The door is blocked against opening from
the inside.
The door can be opened from both the out-
side and the inside.
To Next Page
Loading...
