DISPLAYS AND VOICE CONTROL
}}
89
Show trip statistics in the centre
display
Trip statistics from the trip computer are dis-
played graphically in the centre display and pro-
vide an overview that facilitates more fuel-effi-
cient driving.
Open the Driver performance
app in app view in order to
show the trip statistics.
Each bar in the diagram sym-
bolises a distance of 1, 10 or
100 km, alternatively miles. The
bars are filled in from the right as driving pro-
gresses. The bar on the far right shows the value
for the current distance.
The average fuel consumption and total driving
time are calculated since the last time the trip
statistics were reset.
Fuel and electricity consumption are shown in
separate graphs. Electricity consumption is "net"
consumption, i.e. energy consumed minus regen-
erated energy created during braking.
Trip statistics from the trip computer
2
.
NOTE
When driving with electric operation, fuel con-
sumption can be indicated in the trip statistics
if the additional heater
3
is running.
Related information
•
Settings for trip statistics (p. 89)
•
Trip computer (p. 86)
Settings for trip statistics
Reset or adjust settings for trip statistics.
1.
Open the
Driver performance app in app
view in order to show the trip statistics.
2.
Press
Preferences to
•
change graph scale. Select resolution 1,
10 or 100 km/miles for the bar.
•
reset data after every trip. Performed
when the car has been stationary for more
than 4 hours.
•
reset data for the current trip.
Trip statistics, calculated average consump-
tion and total driving time are always reset
simultaneously.
Units for distance, speed, etc. can be changed via
system settings in the centre display.
2
The figure is schematic - parts may vary depending on car model.
3
Applicable to fuel-driven auxiliary heater.
To Next Page
Loading...
