Vonage VTA - Front Panel Description; Rear Panel Description

3D-Link VTA User Manual
Chapter 1 - Product Overview
Rear Panel
Front Panel
Power Internet Phone 1 Phone 2
When the power light stops
blinking and is a solid
green, this indicates that
your adapter has started up
properly. Note that both the
power light and the phone
light must be solid in order
to make a phone call.
Solid light indicates
connectivity to your
router or network
- whenever there is data
activity this light will
blink.
Solid light indicates
that phone line 1 is
ready for Vonage
Internet telephone or
FAX calls.
Solid light indicates
that optional phone
line 2 is ready for
Vonage Internet
telephone or FAX
calls.
Phone (1 & 2) Internet Reset Power
Plug your phone into port
#1 and if you’ve signed
up for a second Vonage
phone line, an optional
phone or FAX machine
into phone port #2.
Connect to your network
using the blue Ethernet
cable.
Press the reset button to
reset the VTA back to the
default settings.
Plug in the supplied
power adapter.