Vongon polyphrase - MIDI; MIDI Control Change (CC) Table

MIDI
Polyphraseʼs midi input provides tempo sync, full remote control of all parameters on
the faceplate, and access to 9 onboard user preset slots. See implementation details
below.
MIDI CONTROL CHANGE (CC) TABLE
When the pedal receives Midi Control Change messages on its assigned midi channel,
it will internally set parameters to the new midi value. Manually adjust the faceplate
parameter to reset the value to the physical faceplate control.
MIDI MESSAGE
PARAMETER
VALUES
CC #1
REPEATS
0-127
CC #2
TONE
0-127
CC #3
DEPTH
0-127
CC #4
RATE
0-127
CC #5
SLIDER L
0-127
CC #6
SLIDER R
0-127
CC #7
MIX
0-127
CC #8
TIME
0-8: 85ms, 9-22: 170ms, 23-37: 341ms, 38-56:
682ms, 57-74: 1.3s, 75-91: 2.7s, 92-106: 5.5s,
107-120: 11s, 121-127: 22s
CC #9
ECHO STYLE
0-43: DUAL STEREO,
44-87: PING PONG,
88-127: MONO
CC #10
SYNC
0-63: OFF, 64-127: ON
CC #11
TRIG MODE
0-63: OFF, 64-127: ON
CC #13
BYPASS
0-63: OFF, 64-127: ON
CC #14
INFINITE
0-63: OFF, 64-127: ON
CC #15
TAP TEMPO
Any CC value triggers tap
12