A5P | 01
PROBLEM SOLUTION
• The POWER LIGHTPOWER LIGHT shows that the appliance
is ready to use. Avoid leaving too much time
before you fill the moulds.
• After several batches are cooked, we
recommend disconnecting the Waffle Maker
and allowing it to completely cool before
continuing with more batches.
• Ensure the lid is kept closed until you are
ready to add the mixture.
• Unplug the Snack Maker and allow to cool
completely. Clean the BAKING PLATES BAKING PLATES
thoroughly before attempting another batch.
FOOD IS BROWNING TOO
QUICKLY.
MIXTURE IS OVERFLOWING.
FOOD IS NOT COOKED EVENLY.
THE APPLIANCE IS PRODUCING
SMOKE.
• Ensure each mould is filled no more than ¾
full with the mixture.
TROUBLESHOOTING
To Next Page
Loading...