VOODOO LAB AMP SELECTOR
User’s Manual
Introduction
The Voodoo Lab Amp Selector is the ultimate stand-alone tool for
switching your guitar into multiple amplifiers. It lets you use up to
four amps simultaneously without added hum or loss of tone. You
can switch between them or layer them in any combination. The
switching is absolutely silent with no clicks or pops. If you play
multiple amplifiers, this is what you’ve been waiting for!
The Amp Selector’s unique programmable switching lets you
tailor its operation to your own playing style. On/off mode allows
you to operate it as four independent on/off controls. Or exclusive
mode means that whichever button you select, only that amplifier is
active. This permits you to change amps with only a single button
press, no need to first turn one off and then another on. You can
even use both modes simultaneously to provide one touch control
yet still select an additional amp for layering!
Level controls for each output provide a convenient way to balance
the volume between amps. There is also second input which if used
will split the Amp Selector into two separate A/B/Both functions.
This is great for applications using two guitars (electric and acous-
tic, for example) or a stereo signal path. And we included a tuner
out‚ which gives you an additional output without loading down
your guitar’s tone. Of course you can use this output to run a tuner,
but it can also drive a direct signal to a console or even chain addi-
tional Amp Selectors if you need more than four amps.
Voodoo Lab provides tone tools for the serious artist and profession-
al player. Your Amp Selector is hand made using the finest possible
components and engineered to be rugged, reliable and provide the
best possible tone. Enjoy it!
To Next Page
Loading...
Need help?
General
