Need help?Do you have a question about the Voodoo Lab GCX and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| Number of Loops | 8 |
| MIDI | Yes |
| Input Impedance | 1 MΩ |
| Frequency Response | 20 Hz - 20 kHz |
| Signal to Noise Ratio | > 100 dB |
| Total Harmonic Distortion | < 0.01% |
| Maximum Input Level | +20 dBu |
| Type | Audio Switcher |
Provides a general overview of the GCX Guitar Audio Switcher's capabilities and features.
Details the functions of the GCX's front panel controls and indicators.
Describes the connections and ports available on the rear panel of the GCX unit.
Lists the items included in the GCX factory carton and initial setup steps.
Explains the benefits of the GCX's buffered input for maintaining guitar tone quality.
Illustrates different ways to connect instruments and devices using feed-thru jacks.
Explains the fundamental function of GCX audio loops for switching effects in/out of the signal path.
Demonstrates how GCX loops can be used to select between different audio paths or devices.
Shows how loops can be configured to mute the signal going to effect pedals.
Illustrates how multiple loops can be used in combination to switch between or combine amplifiers.
Details how GCX loops can function as latching footswitches for amp channel or processor switching.
Explains the difference between normally open and normally closed switch types and their usage.
Describes how GCX loops can be configured as momentary switches for bypass or other functions.
Guides on connecting the GCX to a Ground Control foot controller using MIDI cables.
Explains how to configure the Ground Control to recognize and manage GCX loops.
Details how to operate GCX loops via the Ground Control interface after setup.
Provides guidance on programming, saving, and recalling presets on the Ground Control.
Details the product warranty terms and conditions specifically for North America.
Provides information on obtaining warranty service and support outside North America.
To Next Page
