Need help?Do you have a question about the Voodoo Lab Commander and is the answer not in the manual?
General| Brand | Voodoo Lab |
|---|---|
| Model | Commander |
| Category | Accessories |
| Language | English |
The Commander foot controller adds programmability to Pedal Switchers for instant effect changes.
Lists items included in the Commander's factory carton: manual, unit, and warranty card.
Explains connecting Commander to Pedal Switcher via 5-pin MIDI cable for phantom power.
Describes recalling 10 presets in two banks (1-5 and 6-10) for Pedal Switcher settings.
Details steps to save up to 10 presets by holding BANK/STORE and pressing a preset button.
Allows toggling between pairs of presets (e.g., 1 and 6) with a single button for instant sound changes.
Explains how Commander sends MIDI program changes to external devices when switching presets.
Addresses using third-party controllers with Pedal Switcher, noting limitations compared to Commander.
States that Commander only sends program changes on MIDI channel 1.
Clarifies Commander is designed only for Pedal Switcher, not the GCX Audio Switcher.
Confirms multiple Commanders can be used, requiring an adapter for phantom power to the second unit.
Explains Commander can be controlled remotely using MIDI patch changes from other controllers.
Outlines the five-year warranty for North America, covering defects but excluding accident or misuse.
Advises contacting country distributors for warranty information outside North America.
Provides Voodoo Lab contact information: address, phone, fax, email, and website.
To Next Page