Figure 4.12 Endpoint Configurator
4. Click the “Set” button. This will reboot the phone. After the phone has finished
rebooting, it will be automatically configured with the selected User Extension.
5. Configure the other IP (SIP) Phone with the correct parameters.
6. To test the Voptech VI2006, pick up the previously configured IP (SIP) Phone and
call the VI2006‟s extension number (301 in this example). When the call is
established, speak into the phone and verify that the other IP (SIP) Phone can hear
your voice. Check this by calling from both ends.
To Previous Page
Loading...