What to do if the remote control is not working for Vornado Fan?
If the remote control for your Vornado Fan isn't working, start by replacing the battery with a new 3 volt CR2032 battery. Also, make sure that the receiver lens (inside the Vornado 'V' logo) is visible from the remote control, as the remote requires a line-of-sight path.
What to do if GFCI trips with Vornado Fan?
If the GFCI outlet trips when using your Vornado Fan, there might be an issue with the outlet itself. Consider contacting a qualified electrician to inspect the GFCI outlet. Alternatively, try plugging the fan into an outlet that isn't connected to a GFCI device.
Why is the airflow weak in my Vornado 5303DC Fan?
If your Vornado Fan's airflow seems weak or slow, there are a few potential causes. First, check the speed setting and adjust it to a higher level. If that doesn't help, make sure nothing is blocking the airflow. Finally, ensure the fan is directed towards you.
General| Type | Household blade fan |
|---|---|
| Timer | Yes |
| Placement | Table |
| Noise level | 37 dB |
| Control type | Touch |
| Product color | White |
| Fan speed (max) | 1435 RPM |
| Auto oscillating | - |
| Number of speeds | 99 |
| Height adjustment | No |
| Timer duration (maximum) | 12 h |
| AC input voltage | 120 V |
| Power source type | AC |
| AC input frequency | 60 Hz |
| Power consumption (typical) | 33 W |
Weight and Dimensions| Depth | 182.9 mm |
|---|---|
| Width | 271.8 mm |
| Height | 298.5 mm |
To Next Page
